CAMPETTO 5
15kN (1.5t) / A15 optional B125
Distribution system (protection class II) |
Equipping the distribution system individually according to customer requirements |
High operational reliability down to – 40°C |
Can be locked, walked and driven on during operation |
Lid can be filled with surrounding material or tear plate |
High load class from 1.5t to 12.5t |
Tub cover, lock and distributor are interchangeable |
Thermostat-controlled lid heater / diving bell (optional) |
Description
Underfloor distributor CAMPETTO 5 consisting of a solid stainless steel construction (V2A/1.4301) optionally in the sizes 800x552mm or 650x452mm, gas pressure springs for fully automatic opening, manhole cover can be filled individually, distributor assembly according to customer requirements. The tray with a depth of 70mm can be filled individually to adapt to the environment. The cable outlet flap is built into the manhole cover frame (135x90mm).
The manhole cover is closed using a robust locking mechanism (snap lock) and can also be secured with a shackle lock. The cable outlet flap is secured with a double-bit lock. (Locking tool included in the scope of delivery).
The contractor must ensure that the substructure complies with the relevant standards, that the manhole is installed correctly and that there is appropriate drainage. The manhole cover is not watertight (surface water).
Product features
- Can be closed, walked on and driven over during operation
- Lid can be filled with surrounding material or tear plate
- Secured against unauthorized opening (vandal-proof!)
- Gas struts for a powerless, assisted opening process
- GIFAS solid rubber distribution system (protection class II)
- Fitting of the solid rubber distribution system individually according to customer requirements (electrical energy, compressed air, fresh and waste water as well as communication technology)
- Maximum operational safety down to – 40°C
- No condensation due to GIFAS solid rubber distributors
- Resistant to environmental influences
- Stainless steel construction, all metal parts made of V2A/1.4301
- Visible reflectors on the open lid system
- manifold fastening on the underside of the cover
- the solid rubber connection distributor is accessible when installed (E-Check – DGUVA3)
- Tray cover, lock and manifold are interchangeable
- Optional: frost-proof operation with lid heating, thermostat-controlled
- Optional: with diving bell on request
Technical data
Area of application: | Indoor/outdoor area |
Classification according to DIN EN 124: |
15kN (1.5t) / A15 optional B125 |
Lid version: | Stainless steel drip tray, available in two sizes / can be paved |
Shaft dimensions: for distributors 7700-7900 for distributors 7200-7400 |
800x552mm 650x452mm |
Lid heating: | optional |
Diving bell: | optional |
Weight: | approx. 100kg / 130kg |
Installation depth: | 500 or 670mm depending on the version |
GIFAS solid rubber distributor: | Series 7200 – 7900 |
Protection class: | II |
Scope of delivery
Stainless steel construction with manhole cover |
Stainless steel construction with solid rubber electrical distributor SKII |
Stainless steel construction with solid rubber connection distributor SKII |
Fully assembled and wired ready for connection |
Alternative power distributors from GIFAS:
Floor sockets
with removable and fillable hinged
hinged lid or screw lid,
Height-adjustable frame and feet
Energy columns
made of V2A stainless steel are lockable,
can be individually equipped, and offer
a high level of protection against vandalism
Distribution cabinets
made of V4A stainless steel are lockable,
can be individually equipped, and offer
a high level of protection against vandalism